Thermaltake has a wide array of PC cases, ranging from very simple ones to some with very unique designs.
They also happen to be one of the best manufacturers of PC cases, serving a variety of different market niches.
Many of their cases allow end-user customization, whether it’s as simple as LED lighting or as complex as having modular panels that can be taken apart and assembled as per the user's needs.
What's more important, however, is ventilation. The CPU gets hot while in use, and if excess heat isn’t dissipated effectively, issues like thermal throttling kick in and you lose performance. Cases from Thermaltake offer good ventilation and support all kinds of of cooling options to get around this.
Some of their open case designs may leave PC components too exposed to the environment and are not ideal for dusty areas.
Our Top Picks for the Best Thermaltake PC Cases
Here are some of our best picks for Thermaltake pc cases. Key factors to consider would be Size, Fan and Radiator Support/ Cooler compatibility, Front Panel Ports.
1. Thermaltake Core P3
This case is a great choice for users who want to put their system on full display. It provides a panoramic view of the internal components thanks to the tempered glass panels around it. Additionally, there's a wall-mount option for users who would like to go this route.
- Weight: 22.7 Pounds
- Dimensions: 20.2x13.1x18.5 inches
- Front I/O Ports: 2x USB 3.0, 2x USB 2.0, 1x Audio
- 3-way Tempered glass panels
- Vertical/horizontal placement and wall mount
- Modular design
- Vertical PSU installation support
You can set this case up in not only the usual vertical position but also horizontally, or even mount it on a wall. There are included riser cables as well as a vertical PSU mount to ensure you are set to install it in your desired way.
Furthermore, it has tempered glass panels that let you see the components inside, making it a great addition to any desk. The case is modular and can be dismounted. This allows users to disassemble and reassemble it to meet their unique needs.
It supports various cooling options, including custom liquid cooling and up to four 120mm or 140mm fans.
2. Thermaltake H20
This case is simple yet stylish. The front has a clean minimal look that’s interrupted by an RGB strip and a lit-up logo. It also has essential vents that are somewhat hidden but still allow some good amounts of airflow to cool down the system.
- Weight: 16.31 Pounds
- Dimensions: 17.9x8.3x16.4 inches
- Front I/O Ports: 2xUSB 3.0, separate audio and microphone jacks
- 4mm Tempered glass panel
- RGB lighting strip
- Full-length PSU Cover
- 120mm fan pre-installed
- Dual VGA expansion slot
This case looks simple at the first glance. What it lacks in unique aesthetics, it makes up for in hardware compatibility. Along with support for liquid cooling blocks and radiators, it comes with support for tower CPU coolers of up to 180mm height.
Furthermore, users with graphics cards that support it can take advantage of the dual VGA expansion slots, allowing them to output video to two different monitors.
It has a tempered glass window that utilizes smart lock technology. This keeps your components safe without sacrificing ease of use.
To hide away the mess of cables, there’s a full-length PSU cover at the bottom. This helps keep the build clean, enhancing the view through the glass panel.
You have the option for two 3.5-inch or three 2.5-inch drives for storage. These are also hidden from view.
3. Thermaltake S100
Ideal for users who appreciate compact PCs, this case also brings durability to the table with its full-metal construction and thick tempered glass side panel. It also has easily-removable magnetic dust filters that reduce the chances of clogging up your PC's insides, leading to overheating.
- Weight: 13.45 Pounds
- Dimensions: 16.18x8.66x17.36 inches
- Front I/O Ports: 2xUSB 2.0, 1xUSB 3.0, separate audio and microphone jacks
- Tempered glass side panel
- Light, slim and compact
- Multiple fan and radiator configurations
- 120mm Pre-installed fan
- Metal construction
Dust filters help to keep solid particles out of your computer. The magnetic dust filter on this case is easy to remove, and hence easy to clean.
There’s a hinged door with a tempered glass panel on the side. This makes the components easier to access for minor changes and a more hands-on approach. The entire panel can be taken off for more access.
You get a steel construction that is very durable and feels premium. Its front panel has a minimal look, and there are vents on the side that draw in fresh air to cool it down.
A 120mm rear fan is included, and there’s space for multiple radiators and fans. There’s also room for up to six hard drives, which is great for users with the need for high-capacity storage.
4. Thermaltake Tower 900, Black Edition
This is a fairly large super tower case, and rightfully so because it is meant to support large motherboard form factors like the E-ATX. With the generous space inside, you can fit in many components and still get enough room for a dual-loop liquid-cooling system.
- Weight: 54 Pounds
- Dimensions: 19x16.7x29.6 inches
- Front I/O Ports: 4xUSB 3.0, separate audio and microphone jacks
- 3x Tempered glass panels
- Modular panels
- Vertical GPU mounts
- Fits up to 9 storage drives
- Supports DIY/AIO liquid cooling options
- 13 120mm/140mm cooling fans mounting locations
One of the benefits of having a full-tower case is the expansion capabilities you get. The Tower 900 lets users pull off impressive builds with support for the large E-ATX motherboards. You can also implement a DIY water cooling solution to keep the internals at stable temperatures, even under load.
Three tempered glass panels grant a full view of the setup, allowing you to show off your build. A lot of the cables and hard drives are hidden in a rear compartment to maintain a clear view.
There are mounting points on the case for various fan and radiator configurations to make cooling a breeze. Also, users can take advantage of the large storage customization options to equip various hard drives and SSDs.
5. Thermaltake Level 20 MT ARGB
Users who like case lights will appreciate this mid-tower unit. It comes with three pre-installed ARGB fans whose lighting modes can be controlled via a button on the I/O port. Both the front and side panels are made of tempered glass to showcase the components and the build.
- Weight: 14.9 Pounds
- Dimensions: 18.54x8x17.9 inches
- Front I/O Ports: 2xUSB 3.0, separate audio and microphone jacks, RGB switch
- Tempered glass side and front panel
- Full-length PSU cover
- 3x120mm ARGB fans included + 1 rear fan
- 27 LED lighting modes
- 7 PCIe expansion slots
- Six drive bays
This case is ideal for gamers and enthusiasts due to its clean design and lighting. It has a clear front panel allowing you to see the ARGB fans that come preinstalled with the system. On one side is a clear tempered glass panel that’s 4mm thick. This protects the components and also provides quick access to the components.
At the bottom is a PSU shroud or cover that hides away messy cables. It has a small cutout that allows better ventilation for the PSU but doesn’t badly disturb the case’s aesthetic.
There are three filters at the top, side, and bottom that ensure clean air is drawn in to prevent clogging up the internals with dirt or dust. The case does support multiple cooling options, including various size radiators to help the PC run without overheating.
There’s a total of six drive bays, and two support up to 3.5” hard drives for large storage capacities.
6. Thermaltake View 51 Snow
This case comes pre-installed with two large 200mm fans in the front and a single 120mm fan in the rear. Each of the fans has addressable RGB for customization, and being a full-tower, the case is large enough to fit an E-ATX motherboard.
- Weight: 32.96 Pounds
- Dimensions: 21.65x12.4x20.67 inches
- Front I/O Ports: 1x USB 3.1 Type-C, 2xUSB 3.0, 2xUSB 2.0, Separate audio and microphone jacks, RGB switch
- Tempered glass front and side panel
- Built-in ARGB switchboard
- Rotating PCIe slot design
- Hidden PSU and cable management compartment
- Four drive bays
- Eight expansion slots
This case takes cooling very seriously by integrating two 200mm fans on the front side. This draws in more air to enhance the cooling of the PC’s components.
The fans each have nine addressable RGB LEDs and can be configured with up to 27 LED modes. There’s room for up to three more 120mm fans on the top, one in the rear, and three at the bottom.
The case has eight expansion slots that can come in handy if you’ll be using many of the motherboard’s PCIe slots. Since the interior has ample space, you can fit in a large E-ATX motherboard for impressive builds
And, to show off your PC building and customization prowess, the case has a tempered glass panel on the side that gives a window to the PC’s guts.
The case comes equipped with four drive bays, two of which support either the 2.5-inch or 3.5-inch hard drive form factor.
7. Thermaltake Core V1
This case is ideal for building a mini-PC setup. It supports the small mini-ITX form factor motherboards and is made from a sturdy SPCC material. It makes use of the chamber design to separate components, thus making use of the small space to maximize components and performance.
- Weight: 7.1 Pounds
- Dimensions: 10.2x12.4x10.9 inches
- Front I/O Ports: 2xUSB 3.0, Separate audio and microphone jacks
- Interchangeable side panels
- Lightweight and compact
- Up to five fans
- Efficient ventilation
This case is for users who want a high-performance PC with a small footprint. To avoid cramming everything inside the small area, the case implements a chamber design whereby it's divided into top and bottom parts.
The upper chamber holds the components including the fans and motherboard. The bottom chamber holds the PSU as well as the cable management space.
Drive bays are removable, allowing you to fit custom liquid cooling rigs. Being a small case, a lot of considerations have to be made with the spacing.
The sides of the case are interchangeable, allowing you to set it up in all different ways for effective airflow as well as to showcase your components. One of the sides has a clear pane for this reason.
Also, the sides have a mesh design to enhance ventilation, thus aiding in cooling the system during operation.
The case has a lot of potential for expansion including a dual VGA slot and up to 4 storage drives.
8. Thermaltake Core P1
The Core P1 from Thermaltake has a unique open design that grants users a panoramic view of the components inside it. It’s a good case for showcasing your build and the components used. The case supports various placement modes including a wall-mount option.
- Weight: 20.9 Pounds
- Dimensions: 16.6x15x13.1
- Front I/O Ports: 2xUSB 3.0, separate audio and microphone jacks
- 5mm tempered glass panel
- Open frame design
- Supports DIY liquid cooling
- Dismantlable modular design
- High customizability
- Multiple GPU Orientations
This case has three placement options, horizontal, vertical, and wall-mounted. This allows users to choose the method that suits their needs best. The GPU bracket is also customizable to fit the user's preferred orientation. Besides, the riser cable is provided with the case.
At the front is a 5mm tempered glass panel that lets you showcase your build. All around is an open-case design with a panoramic view of the components used.
There’s a compartment in the rear that’s meant for cable management, hence keeping them from view.
The case supports various cooling options including AIOs and custom liquid-cooling builds. Further on customizability, the case is made up of modular panels that are dismantlable and can be put together in a user’s preferred configuration. There’s also the option to 3D print custom parts and use them in the build to add an extra personal touch.
Users with demanding storage needs will benefit from the 4 drive trays and mounts.
A good PC case will provide enough ventilation and support for your components, and even stay out of the way to let you do your best work or be in peak performance when gaming.
The most important consideration when looking for pc cases is the cooling support for your desired setup. If you plan to use a tower air cooler there has to be enough horizontal space to hold it. If you are going for an aio cooler, make sure that the radiator fits in the right spot without any size conflicts.
That said, cases from Thermaltake have a lot to offer, including various placement options for users who want to reduce desk clutter.
The cases come in various form factors, allowing builds of various PC sizes. When choosing one, you have to consider the kind of PC you want to build as well as your desired aesthetics.
Having a case that works is good, but, if it looks good while performing well, that’s even better!