10 “ps” command examples in Linux – Monitor processes

By | April 30, 2023

Linux ps command

The ps command on linux is one of the most basic commands for viewing the processes running on the system. It provides a snapshot of the current processes along with detailed information like user id, cpu usage, memory usage, command name etc.

It does not display data in real time like top or htop commands. Even though it has fewer features, it is still an essential process management and monitoring tool that every linux user should know about.

In this post we are going to revise the basics of using the ps command to check the processes and filter and sort them in different ways to suit better.

Note on syntax

The ps command comes with an unusual set of 2 syntax styles. That is BSD and UNIX both. New users are often confused with and mis-interpret the two styles. So here is some basic info to get it clear before moving on.

Note : "ps aux" is not the same as "ps -aux". For example "-u" is used to show process of that user. But "u" means show detailed information.

BSD style - The options in bsd style syntax are not preceded with a dash.

ps aux

UNIX/LINUX style - The options in linux style syntax are preceded by a dash as usual.

ps -ef
It is okay to mix both the syntax styles on linux systems. For example "ps ax -f".
But in this post we shall mostly focus on the unix style syntax.

ps command examples - How to use it

1. Display all processes

The following command will give a full list of processes

$ ps ax
$ ps -ef

Pipe the output to "less" to make it scrollable.

Use the "u" option or "-f" option to display detailed information about the processes

$ ps aux
$ ps -ef -f
Why is the USER column not displaying my username, but showing others like root, www-data etc ?

For all usernames (including yours) if the length is greater than 8 characters then ps will fall back to show only the UID instead of username.

2. Display process by user

To filter the processes by the owning user use the "-u" option followed by the username. Multiple usernames can be provided separated by a comma.

$ ps -f -u www-data
UID        PID  PPID  C STIME TTY          TIME CMD
www-data  1329  1328  0 09:32 ?        00:00:00 nginx: worker process
www-data  1330  1328  0 09:32 ?        00:00:00 nginx: worker process
www-data  1332  1328  0 09:32 ?        00:00:00 nginx: worker process
www-data  1377  1372  0 09:32 ?        00:00:00 php-fpm: pool a.localhost                                               
www-data  1378  1372  0 09:32 ?        00:00:00 php-fpm: pool a.localhost                                               
www-data  4524  2359  0 10:03 ?        00:00:00 /usr/sbin/apache2 -k start
www-data  4527  2359  0 10:03 ?        00:00:00 /usr/sbin/apache2 -k start
www-data  4528  2359  0 10:03 ?        00:00:00 /usr/sbin/apache2 -k start

3. Show process by name or process id

To search the processes by their name or command use the "-C" option followed by the search term.

$ ps -C apache2
  PID TTY          TIME CMD
 2359 ?        00:00:00 apache2
 4524 ?        00:00:00 apache2
 4525 ?        00:00:00 apache2
...

To display processes by process id, use the "-p" option and provides the process ids separated by comma.

$ ps -f  -p 3150,7298,6544

The "-C" must be provided with the exact process name and it cannot actually search with a partial name or wildcard. To search the process list more flexibly, the usual grep command has to be used

$ ps -ef | grep apache

4. Sort process by cpu or memory usage

System administrators often want to find out processes that are consuming lots of memory or CPU. The sort option will sort the process list based on a particular field or parameter.

Multiple fields can be specified with the "--sort" option separated by a comma. Additionally the fields can be prefixed with a "-" or "+" symbol indicating descending or ascending sort respectively. There are lots of parameters on which the process list can be sorted. Check the man page for the complete list.

$ ps aux --sort=-pcpu,+pmem

Display the top 5 processes consuming most of the cpu.

$ ps aux --sort=-pcpu | head -5
USER       PID %CPU %MEM    VSZ   RSS TTY      STAT START   TIME COMMAND
root         1  2.6  0.7  51396  7644 ?        Ss   02:02   0:03 /usr/lib/systemd/systemd --switched-root --system --deserialize 23
root      1249  2.6  3.0 355800 30896 tty1     Rsl+ 02:02   0:02 /usr/bin/X -background none :0 vt01 -nolisten tcp
root       508  2.4  1.6 248488 16776 ?        Ss   02:02   0:03 /usr/bin/python /usr/sbin/firewalld --nofork
silver    1525  2.1  2.3 448568 24392 ?        S    02:03   0:01 /usr/bin/python /usr/share/system-config-printer/applet.py

5. Display process hierarchy in a tree style

Many processes are actually forked out of some parent process, and knowing this parent child relationship is often helpful. The '--forest' option will construct an ascii art style tree view of the process hierarchy.

The following command will search for processes by the name apache2 and construct a tree and display detailed information.

$ ps -f --forest -C apache2
UID        PID  PPID  C STIME TTY          TIME CMD
root      2359     1  0 09:32 ?        00:00:00 /usr/sbin/apache2 -k start
www-data  4524  2359  0 10:03 ?        00:00:00  \_ /usr/sbin/apache2 -k start
www-data  4525  2359  0 10:03 ?        00:00:00  \_ /usr/sbin/apache2 -k start
www-data  4526  2359  0 10:03 ?        00:00:00  \_ /usr/sbin/apache2 -k start
www-data  4527  2359  0 10:03 ?        00:00:00  \_ /usr/sbin/apache2 -k start
www-data  4528  2359  0 10:03 ?        00:00:00  \_ /usr/sbin/apache2 -k start
Try not to use any sorting with the tree style display, as they both effect the order of display in different ways.

6. Display child processes of a parent process

Here is an example of finding all forked apache processes.

$ ps -o pid,uname,comm -C apache2
  PID USER     COMMAND
 2359 root     apache2
 4524 www-data apache2
 4525 www-data apache2
 4526 www-data apache2
 4527 www-data apache2
 4528 www-data apache2

The first process that is owned by root is the main apache2 process and all other apache2 processes have been forked out of this main process. The next command lists all child apache2 processes using the pid of the main apache2 process

$ ps --ppid 2359
  PID TTY          TIME CMD
 4524 ?        00:00:00 apache2
 4525 ?        00:00:00 apache2
 4526 ?        00:00:00 apache2
 4527 ?        00:00:00 apache2
 4528 ?        00:00:00 apache2

7. Display threads of a process

The "-L" option will display the threads along with the processes. It can be used to display all threads of a particular process or all processes.

The following command shall display all the threads owned by the process with id 3150.

$ ps -p 3150 -L

8. Change the columns to display

The ps command can be configured to show a selected list of columns only. There are a large number of columns to to show and the full list is available in the man pages.

The following command shows only the pid, username, cpu, memory and command columns.

$ ps -e -o pid,uname,pcpu,pmem,comm

It is possible to rename the column labels

$ ps -e -o pid,uname=USERNAME,pcpu=CPU_USAGE,pmem,comm
  PID USERNAME CPU_USAGE %MEM COMMAND
    1 root           0.0  0.0 init
    2 root           0.0  0.0 kthreadd
    3 root           0.0  0.0 ksoftirqd/0
    4 root           0.0  0.0 kworker/0:0
    5 root           0.0  0.0 kworker/0:0H
    7 root           0.0  0.0 migration/0
    8 root           0.0  0.0 rcu_bh
    9 root           0.0  0.0 rcuob/0
   10 root           0.0  0.0 rcuob/1

Quite flexible.

9. Display elapsed time of processes

The elapsed time indicates, how long the process has been running for. The column for elapsed time is not shown by default, and has to be brought in using the "-o" option

$ ps -e -o pid,comm,etime

10. Turn ps into an realtime process viewer

As usual, the watch command can be used to turn ps into a realtime process reporter. Simple example is like this

$ watch -n 1 'ps -e -o pid,uname,cmd,pmem,pcpu --sort=-pmem,-pcpu | head -15'

The output on my desktop is something like this.

Every 1.0s: ps -e -o pid,uname,cmd,pmem,pcpu --...  Sun Dec  1 18:16:08 2013

  PID USER     CMD                         %MEM %CPU
 3800 1000     /opt/google/chrome/chrome -  4.6  1.4
 7492 1000     /opt/google/chrome/chrome -  2.7  1.4
 3150 1000     /opt/google/chrome/chrome    2.7  2.5
 3824 1000     /opt/google/chrome/chrome -  2.6  0.6
 3936 1000     /opt/google/chrome/chrome -  2.4  1.6
 2936 1000     /usr/bin/plasma-desktop      2.3  0.2
 9666 1000     /opt/google/chrome/chrome -  2.1  0.8
 3842 1000     /opt/google/chrome/chrome -  2.1  0.8
 4739 1000     /opt/google/chrome/chrome -  1.8  1.0
 3930 1000     /opt/google/chrome/chrome -  1.7  1.0
 3911 1000     /opt/google/chrome/chrome -  1.6  0.6
 3645 1000     /opt/google/chrome/chrome -  1.5  0.4
 3677 1000     /opt/google/chrome/chrome -  1.5  0.4
 3639 1000     /opt/google/chrome/chrome -  1.4  0.4

The output would be updated every 1 second to refresh the stats. However do not think that this is similar to top.

You would notice that the output of top/htop command changes much more frequently compared to the above ps command.

This is because the top output sorts on a value that is a mix of cpu usage and memory usage. But the above ps command sorts in a more simpler manner, taking 1 column at a time (like school maths). So it would not update rapidly like top.

Conclusion

The above should give you a brief introduction on how to use the ps command on a linux server. To learn more check out the manual pages with "man ps". If you want to use more featureful tools try the top or htop commands.

If you have any questions or feedback, let us know in the comments below.

About Silver Moon

A Tech Enthusiast, Blogger, Linux Fan and a Software Developer. Writes about Computer hardware, Linux and Open Source software and coding in Python, Php and Javascript. He can be reached at [email protected].

16 Comments

10 “ps” command examples in Linux – Monitor processes
  1. Shndo

    Hello and thanks for the info. My question is about a top. how I can specify a process in top command. What I want to do is to monitor only two processes and want to specify those process and have the output continually stored in a text file.
    your 10. Turn ps into an realtime process viewer is great but I can’t save its output continually in a txt file.

    Thank you!

    1. Dheeraj dogiparthi

      ps -ef is the POSIX standard form and ps aux is the BSD form [not that there is no hyphen]
      Currently both systems accept any of the two forms.
      -e and au are equivalent and -f implies full listing while u in aux implies user oriented.

Leave a Reply

Your email address will not be published. Required fields are marked *